Is your refrigerator Water Filter actually safe? The Everydrop Filter 1 is NSF-certified to reduce 28+ contaminants, including Lead, Pesticides, and Pharmaceuticals. Compatible with Whirlpool, Maytag, KitchenAid, and more. Get pure, safe water for your family today.
Table of Contents
If you are looking for a reliable Water Filter for your refrigerator, you have likely come across the Everydrop Filter 1.
It is the only model certified by Whirlpool for their fridges. But with so many cheap generic options on Amazon, is this $50 filter actually worth it?
In this review, we tested the flow rate, taste, and lead removal of the Everydrop unit to see if it beats the generic knock-offs.
Bottom Line: If you want a solution that actually removes pharmaceuticals and lead (not just chlorine taste), this is the only safe choice.
👉 Check the Price on Amazon: See Everydrop Deal
Why This is the Best Water Filter for Whirlpool
Most people buy a generic cartridge because it is cheap. But here is the difference:
- Generics (NSF 42): Only remove Chlorine (Taste).
- Everydrop (NSF 53): Removes Lead, Mercury, and Pesticides.
If you are looking to filter your water to protect your family’s health, a generic one is basically just a fancy strainer. The Everydrop is a medical-grade shield.
Compatibility: Does This Water Filter Fit?
The Everydrop Water Filter 1 (EDR1RXD1) is designed to fit Side-by-Side and Bottom-Freezer refrigerators from:
- Whirlpool
- Maytag
- KitchenAid
- JennAir
Tip: Check your old Water Filter. If it has a grey cap with a “1” on it, this is the correct replacement.
Real vs. Fake Water Filter: The “Shake Test”
Counterfeiters flood Amazon with fake filters.
Here is how to spot a fake:
- Hologram: The box must have a 3D hologram sticker.
- Weight: A real cartridge feels heavy because it is packed with a carbon block. Fakes feel light and “hollow.”
- Water Flow: If the water comes out incredibly fast immediately, it is likely a fake with no internal filter media.
How to Install Your New Refrigerator Water Filter
Replacing your cartridge is easy, but many people skip the most important step (Flushing). Follow these steps to ensure perfect flow:
- Locate the Filter: On most Whirlpool/KitchenAid models, the Filter housing is located in the top-right corner of the fridge interior or the bottom grille near the floor.
- Open the Door: Lift the colored tab or twist the cap to release the old filter. Pull it straight out.
- Transfer the Cap: If your old filter has a colored cap on the end, twist it off and place it on the new Everydrop Filter 1.
- Insert & Click: Push the new filter into the slot until it clicks or the door snaps shut.
- The Critical Step (Flush): Do NOT drink the water yet. You must dispense and discard 4 gallons of water.
- Why? This pushes out trapped air bubbles and loose carbon dust. If you skip this, your dispenser will sputter and drip.
Troubleshooting: Common Water Filter Issues
Is your Water Filter acting strange? Here are the fixes for the most common complaints.
Why is my Water Filter flow so slow?
If you just installed it and the water is trickling, you likely have Trapped Air.
- Fix: Continue flushing the water dispenser. It can take up to 5 minutes of continuous flow to force all the air out of the carbon block.
Why are there black specks in my ice?
These are tiny particles of carbon from the Water Filter. They are harmless (it’s just charcoal), but unappealing.
- Fix: Dump your first batch of ice and flush another 1-2 gallons of water through the dispenser.
Why does the filter rattle or make noise?
A “hammering” noise usually means the water pressure is too high or there is an air pocket.
- Fix: Remove the filter and reinstall it to ensure a tight seal. Run the water again to stabilize pressure.
Pros and Cons of this Model
Pros:
- Certified Safety: One of the few filters rated to remove Lead and Pharmaceuticals.
- Taste: Instantly fixes “metallic” tasting city water.
- Easy Install: Simple “Push-in” design.
Cons:
- Price: It is expensive compared to generics..
- Prep Required: You must flush 4 gallons of water through it before drinking.
Verdict: Is Everydrop the Best Water Filter?
For owners of Whirlpool or KitchenAid fridges, the Everydrop Filter 1 is arguably the best Water Filter money can buy.
While it costs more than a generic brand, it is the only one guaranteed not to leak and the only one certified to remove dangerous contaminants.
Frequently Asked Questions (FAQ)
How often should I change my Refrigerator Water Filter?
Most manufacturers, including Whirlpool, recommend changing your Water Filter every 6 months or every 200 gallons. If you have “Hard Water” or heavy sediment, you may need to change it sooner (every 3-4 months) to keep the flow fast.
Does this Filter remove fluoride?
o. The Everydrop Filter 1 is designed to remove contaminants like Lead, Chlorine, Pesticides, and Pharmaceuticals. It does not remove beneficial fluoride from municipal water.
Can I recycle my old cartridge?
Yes! Do not throw your old Water Filter in the trash. Whirlpool and Everydrop have a recycling program called “Refresh and Recycle.” You can buy a recycling kit online to mail back your used filters properly.
Will this model fit my Kenmore fridge?
It depends. If your Kenmore fridge was manufactured by Whirlpool (which many are), the Everydrop Filter 1 might fit. Look for the model number EDR1RXD1 or check if your old filter has a “1” on the cap.
Is a generic Water Filter safe to use?
Generic filters are generally “safe” (they won’t kill you), but they are rarely certified to remove heavy metals. If you use a cheap generic knock-off, you are essentially just removing the taste of chlorine, but leaving the lead and pesticides in your glass.
Upgrade Your Home’s Health
Now that you have secured clean water for your fridge, check out our other top-rated reviews for a healthier home:
- Clean Air: Is your home dusty? Read our Filtrete MERV 11 Air Filter Review to see if it really stops allergens.
- Countertop Water: Don’t trust your fridge lines? Check out our Brita UltraMax Dispenser Review for a portable filtration solution.
